Total is a ready to use car interior cleaner which is safe to use on all interior car surfaces. Whether you are cleaning plastic, alcantara, vinyl rubber, cloth, or carpet, Total's sophisticated low-foaming surfactants will not disappoint. From modern "soft-touch' plastics, to badly stained carpets, or even neglected vintage vinyl, Total is up to the task.
READY-TO-USE FOR QUICK AND SIMPLE SPRAY-ON APPLICATION
Developed as a safe alternative to general purpose APCs - which can be too harsh for many vinyl, soft-touch plastic and fabric surfaces - Total is packed with sophisticated, low-foaming surfactants making it capable of breaking down a huge variety of organic and inorganic material safely, without abrading or staining the variety of materials used in modern and classic vehicles.
Application:
Vinyl, Plastic and Rubber:
For light soiling, spray Total directly onto a general purpose microfibre towel and wipe onto surface. Switch to a dry general purpose microfibre towel and buff off any residues, revealing a perfectly clean finish. If heavier soiling is present, spray Total directly onto the surface to be cleaned, allow dwelling momentarily, and agitate with a soft, short-bristle brush. You can then use a general purpose microfibre towel to soak up the remaining product and grime. Regularly re-fold, and periodically change your microfibre towels during the interior cleaning process.
Spot removal on textiles:
For quickly removing stains and spills on fabric and carpeted surfaces, spray Total directly onto the spot until saturated and allow to dwell for 1-2 minutes. If necessary, work the product into the surface with a soft, short-bristle brush to help break down the stain. Once lifted, you can blot the surface with a dry, general purpose microfibre towel to soak up the remaining product. If the stain remains, repeat the process.
Textile Shampooing:
To deep clean fabric and carpets, begin by dry vacuuming the material to remove any loose dirt. Liberally spray Total directly onto the area, until the surface is damp with product. Allow the product to dwell for 1-2 minutes. Wet a soft, short-bristle brush in a bucket of water and agitate the area. You can then rinse the material with clear water and use a wet/dry vacuum or carpet extractor to remove the excess product. Repeat the process until the extracted rinse water stays clear.
